Posts Tagged ‘water clarity’
Creative Water Solutions Involved in Energy Efficient Makeover at Debbie Meyer Swim School
Creative Water Solutions is proud to announce its involvement and support of the Debbie Meyer Swim School Makeover Project.
Check out the exciting makeover at the Debbie Meyer Swim School and all the various energy savings that can be achieved by applying current knowledge and the latest technologies to maintain superior water clarity and sanitation
Opening your pool this summer the PoolNaturally® way!
If you are a new or returning PoolNaturally® user, here are our suggestions for a more natural pool opening:
Spring Start Up/Opening
Install the PoolNaturally® system at the beginning of the pool season for best results, but better late than never! Returning PoolNaturally users report much easier pool start up the following summer. Excellent opening results are seen even if users installed PoolNaturally as late as August of the last pool season.
Start with a fresh filter
Remove filter media (sand, DE) and replace with fresh media if you are just starting the PoolNaturally system. If you have a cartridge filter, for best results replace it or please ensure the cartridge is well cleaned. Why? If you are new to PoolNaturally, your pool has years of accumulation of biofilm and the filter will contain a large amount of it. The easiest way to get rid of much of it fast is to change out the media or replace the cartridge filter.
If you used PoolNaturally last season, be sure to backwash the sand filter after filling your pool with water. Place cleaned or new cartridge filters back in the system.
Less is more!
When starting/opening your pool, know what you are putting in it! If you used PoolNaturally last summer, don’t start by adding shock, algaecides and cyanuric acid. Expect that your pool will start up with a minimum amount of additives.
-Add chlorine to get desired free chlorine.
-Adjust pH, alkalinity, hardness , and CYA to recommended levels below:
- Free chlorine 1-2 ppm
- pH 7.2-7.6
- Alkalinity 40-120
- Hardness 200-300
- CYA *less than 20 ppm
-Once water has been balanced, add PoolNaturally® PoolRefills to PoolNaturally® contact chamber according to the dosage chart below. It is important that once there is enough water in your pool to start the pumps, get it balanced and add PoolRefills as soon as possible, to begin experiencing the conditioning effects of moss.
How Your Pool Will Change With PoolNaturally
Depending on the age and how much your pool is used, there could be a lot of material (including scale) that is shed from the pipes, pumps, heater, and pool surfaces – this is evidence that the PoolNaturally system is working! Use a pool vacuum to get rid of the larger particles that settle out in the pool and clean or backwash filters to get rid of the smaller particles.
Maintain 1-2 ppm of chlorine – you won’t need anything higher. With PoolNaturally, your pool is no longer precariously on the edge of ‘going bad.’ It will take less chlorine to maintain this 1-2 ppm free available chlorine, so turn down your automatic chlorinator or salt generator to the lowest settings.
David Knighton Named to Top 50 in Water Treatment Industry
As part of their 50th ‘Golden Anniversary’ of service to the international water treatment industry, Water Conditioning and Purification magazine announced its first annual Top 50 Awards. Dr. Knighton, Co-founder and President of Creative Water Solutions, LLC was named along with 49 other industry leaders, for his contribution that “is revolutionizing water clarity/quality best practices with sphagnum moss to condition water, reduce chemicals and mitigate biofilm accumulation.” Read more at http://www.wcponline.com/pdf/0906Top50Awards.pdf.
